Streamlight Survivor LED
The Streamlight Survivor LED is designed for firefighters/rescue workers, and also anyone else who finds themselves in a harsh worksite situation. It is very safe to use in and near hazardous and flammable gases, liquids, etc. It is a very bright, dependable and completely durable flashlight. It produces a very tight, narrow beam for penetrating thick smoke.
The Streamlight Survivor LED is equipped with a deep, smooth reflector for concentrating the beam into a small, bright central location. Also, there is enough light in the beam to see the surrounding location. This flashlight has 4 modes. The thick rubber push button on the top is easy to find blind, and also easy to use when wearing gloves. Press and let go for level high, press again and hold for low, press again and hold for flash. To get moonlight mode, simply turn the light on and then hold the switch down through the high, low and flash settings. After 5 to 8 seconds, it will go into moonlight mode. Level high produces 175 lumens / 36,000 candela, with a beam distance of 1,243 feet and a run time of 3.5 hours. On low, the Streamlight Survivor LED puts out a bright light and extended run time. It delivers 60 lumens / 12,000 candela, its beam reaching 718 ft, with a 13 hour run time. Flash mode is great if you have to get someones attention. It flashes at a rate of around 2 flashes per second, and has a run time of 8 hours. The moonlight mode is terrific for general use in dark conditions. It supplies a low level light, and has a run time of 20 days. It features a spring clip on the back, so you can attach it to your jacket and have a forward facing light. The clip is very easy to find and use, even with large gloves. The casing is a thick polycarbonate, with O-ring seals at the bezel and battery compartment door for water resistance. The indestructible, scratch-proof lens keeps the light shining flawlessly. It can run on 4 ‘AA’ cells, or rechargeable battery pack.